Cutting Deck Protection
The Toro bi-directional impact absorption system was designed for an impact of 5 mph. The spring-loaded cylinder allows the deck to rotate upon impact. This rotating action absorbs the peak force experienced when an operator strikes an object, protecting the main deck and frame components so you have less down time and more productivity.
The deck gearboxes include an overrunning clutch that isolates the force from accidental blade impacts to keep the mower and tractor safe.
Simple Height of Cut Adjustment
The Groundsmaster® 1200 is not only a highly productive mower, it’s also very versatile. Each deck features four mowing height adjustment points making it simple and quick to deliver the exact mowing height for superior conditions.
Ductile cast iron spindle housing is large in diameter (229 mm at the base) to dissipate impact loads. Dual tapered roller bearings last up to six times longer than ball bearings.
The two full width rollers on the front and rear of each deck help deliver an exceptional quality of cut. The front roller help reduce scalping in undulated terrain while the rear roller delivers the exceptional turf striping. Each roller includes heavy duty bearings featuring easy access grease points.
The Groundsmaster® 1200 features a deck lift system allowing for the decks to be lifted from the turf while the PTO is engaged to quickly turn around without scuffing or transport over cart paths. This system helps keep the operator running at peak productivity.
The Groundsmaster® 1200 wing decks fold up near vertical for a narrow 86″ (218.4cm) transport width making it easy to get from site to site. Additionally, the transport wheels feature a torsion axle delivering a remarkably smooth ride making transport quick and comfortable.
|Width of Cut||Overall: 365 cm|
Individual Deck: 137 cm
|Mowing Rate||Up to 3.53 hectares/h|
|Mowing Speed||9.7 km/h|
|Deck Construction||10-gauge high strength steel constructed deck with 7-gauge bolt-in reinforcements. 7-gauge welded steel side skids with 12.7 cm diameter steel rollers.|
|Height of Cut||1.3 cm to 10.2 cm|
|Deck Drive||PTO driveshaft drives 4-way gearbox, secondary driveshafts drive individual deck gearboxes, spindles belt driven with spring tensioner pulley|
|Spindle Bearings||3.17 cm diameter spindle shafts, 22.9 cm diameter conical ductile iron housing and two greaseable tapered roller bearings. Driven counter clockwise when viewed from the top.|
|Wing Protection||Bi-directional, impact absorption damper on each wing deck|
|Transport Height||192.4 cm|
|Transport Length||369.9 cm|
|Transport Width||218.4 cm|
|Width||380.5 cm (decks down)|
|Power Requirements||Minimum 35 hp at the PTO, 540 RPM|
|Blade Tip Speed||15,000 ± 300 ft/min at 540 PTO RPM|
|Blade Type||9 blades, 6.4 mm thick|
|Tyres||20 X 10 – 10 6 ply|
|Total Weight||1,354 kg|
|Warranty||2 years limited warranty. Refer to operator’s manual for further details.|